Bootzeil ShapeX Instructions Manual page 4

Sailing yachts
Table of Contents

Advertisement

Disclaimer
• The color of the glue may change upon contact with UV light.
• When tape is taken off, it may leave residues behind.
• Glue should dry at least 3 minutes before tension is exerted on it.
• After 12 hours the glue is completely dry.
• To prevent mistakes, steps should be followed in the correct following order.
• Read the entire manual before installation. This will give you a clear picture of the
process.
• If you don't understand a procedure, contact Bootzeil or check the videos on the
website. The set contains exactly enough components for installing one boat cover.
If you make a mistake and lose a component, you can order that component
separately (for your convenience, try to prevent this).
• The boat cover can withstand snow. Nevertheless Bootzeil recommends to remove
extreme amounts of snow.
Bootzeil
The best protection

Advertisement

Table of Contents
loading

Related Products for Bootzeil ShapeX

Table of Contents