Bootzeil ShapeX Instructions Manual page 10

Gluing instructions
Phase 2: BWF glue (use when the temperature is at least 5°C)
8
By positioning the screw in the glue tube, it
is easier to apply the right amount of glue.
The BWF glue should be applied horizontally. Take the boat
cover from the boat to lay it flat and add glue to the glue seams.
9
Be careful when applying glue.
Excessive gluing will affect the
appearance of the boat cover.
We advise you to try to glue a
bit on the inside of the boat
cover first, to get a feel for
which quantity should be used.
Bootzeil
The best protection
10