Nubert nuSub XW-1200 Manual
Hide thumbs Also See for nuSub XW-1200:

Advertisement

Quick Links

12/2020
nuSub
Device approval and conformity
with EC directives
Nubert electronic GmbH hereby declares that this product complies with the
2014/53/EU directives, provided that it is installed and used in accordance with
the manufacturer's instructions. The full text of the EU Declaration of Conformity
is available at the following Internet address:
https://www.nubert.de/konformitaetserklaerungen/716/
• Do not change the serial number on the speaker. It is part of the operating
approval.
• If the loudspeaker is repaired or modified by workshops or other third parties
not authorized by Nubert, it loses its operating license.
• Only accessories and devices may be connected which in turn comply with all
legal requirements and are approved.
• The loudspeaker may only be used for the applications specified in the „In-
tended Use" section
Intended use
This speaker is designed exclusively for sound reproduction in dry rooms. Use
the speaker only as described in this manual. Any other use (particularly safe-
ty-relevant or medical use, installation in open environment like IP-certified prod-
ucts) is considered improper and may result in property damage or even personal
injury. Nubert electronic GmbH does not assume any liability for damages caused
by improper use.
Safety instructions
The entire operating manual, in particular the safety instructions, must be read
in full before connecting and commissioning the device. For your own safety,
be sure to follow all warnings and safety instructions in this manual and on the
speaker. The user is not permitted to carry out any work on the loudspeaker
other than the described work. Keep this document so that you have access to
it at all times. Furthermore, it must also be handed over to possible re-owners.
XW-1200
Active subwoofer
Safety instructions
Technical data
Warranty terms
Key to the symbols
The triangle symbol with exclamation mark (without additional comment)
indicates important instructions for commissioning, operation and maintenance
of the device.
The term Caution! next to the triangle symbol indicates a medium risk. Failure
to observe this warning may result in property damage.
The term Danger! next to the triangle symbol indicates a high risk. Failure to
observe this warning may result in death or personal injury
This symbol indicates that you must read and observe the operating in-
structions and the safety and warning notices in order to operate the device.
This symbol (triangle with lightning) warns of dangerous voltages inside
the enclosure and of hazards due to electric shock.
This symbol indicates that the device complies with electrical protection
class 2 and therefore does not require earthing.
Devices with this symbol may only be used in a dry indoor environment.
Equipment marked with this symbol must not be disposed of with house-
hold waste. Refer to the Disposal and Battery Return section at the end of this
manual.
General information
Never operate the loudspeaker unattended!
Danger of electric shock!
To avoid the risk of electric shock, the speaker may not be opened by the
user. There are no user-serviceable parts inside the speaker.
Service work and repairs are reserved for qualified specialists authorized by
Nubert. If you need service, please contact Nubert electronic GmbH directly
(info@nubert.de)!
Danger of suffocation!
Never let children use or play with neither speaker, remote control or packaging
unattended. There is a risk that children will get caught in the packaging film
and suffocate. Make sure that children cannot remove any small parts from the
devices! These parts, like the remote control battery, could be swallowed and
cause suffocation. In case of swallowing any parts, contact a doctor immediately!
1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the nuSub XW-1200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nubert nuSub XW-1200

  • Page 1 Devices with this symbol may only be used in a dry indoor environment. ucts) is considered improper and may result in property damage or even personal injury. Nubert electronic GmbH does not assume any liability for damages caused by improper use.
  • Page 2: Installation Instructions

    • Should the loudspeaker come into contact with liquids or should objects have formance. got inside, please unplug the mains plug immediately and contact Nubert elec- • The loudspeaker smells burnt, develops smoke or makes unusual noises. tronic GmbH (info@nubert.de)!
  • Page 3: Unpacking And Scope Of Delivery

    If WIRELESS IN is selected as the input, the subwoofer follows the wireless transmitter that acts as the master. This function cannot be be deactivated. The If you have any questions or problems during the commissioning of your Nubert standby power consumption is 0.6 watts.
  • Page 4: Warranty Terms

    Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.
  • Page 5: Active Subwoofer

    12/2020 nuSub XW-1200 Active Subwoofer Quick Start Guide Instruction manual 1.Placement First, place the subwoofer at the intended location. 0,8 m 1,6 m 2,4 m 3,2 m In the following, we will give you a few helpful hints: Placement and Sound When you place one or more subwoofers in a room you have differ- ent options, depending on what you want to achieve.
  • Page 6: Wireless Connection

    XW-1200 · Commissioning · 12/2020 EN 3. Wireless connection LEVEL (green) LINE IN FREQ (blue) SOURCE/PAIR Press and hold the SOURCE/PAIR button for 3 seconds to start the pairing-process. L_in (90) The Subwoofer will begin searching for a compatible wireless Mas-...
  • Page 7: Application Examples

    90 Hz 6. Application Examples Example 1: Wirelessly connecting a nuSub XW-1200 Example 2: Wired connection between a nuSub XW-1200 to a pair of nuPro X-4000 loudspeakers and an AV-receiver (LINE IN) When connected wirelessly, the subwoofer receives an unfiltered,...
  • Page 8: Factory Reset

    12/2020 EN 7. Using the Nubert X-Remote App You can also use the Nubert X-Remote App to set up and adjust the subwoofer. The app is available for free at the Google Play Store or at the Apple App Store. The app offers more settings and...

Table of Contents