Nubert nuSub XW-700 Quick Start Manual/Instruction Manual

Hide thumbs Also See for nuSub XW-700:

Advertisement

Quick Links

11/2019 EN
nuSub
1.Placement
First, place the subwoofer at the intended location.
In the following, we will give you a few helpful hints:
Placement and Sound
When you place one or more subwoofers in a room you have differ-
ent options, depending on what you want to achieve.
• We generally recommend a placement that ensures precise bass
reproduction. This is particularly important when listening to mu-
sic and is normally achieved by placing the woofer some distance
away from the walls.
To prevent rumbling and exciting room modes the subwoofer
should be placed, for example, at one fifth of the length and width
of the room or a multiple thereof. The graphics to the right shows
this in a 6 x 4 metre room.
• For home cinema effects, placements that would be disadvanta-
geous for music reproduction can sound the most impressive. For
this purpose, a placement closer to wall or in a corner can be
perceived as good, even if the result is less accurate.
Height-adjustable feet
The subwoofer has aluminium feet with vibration-absorbing rubber
mini-spikes that can be adjusted for a level, stable stand.
By adjusting the mini-spikes you can compensate for surface irreg-
ularities (see picture)
The feet also ensures that the down-firing bass driver have the re-
quired distance to the floor.
Note:
the subwoofer cannot be used without the feet being mounted!

2. Cable connections

Always connect all cables before turning on the subwoofer!
LINE-connection
If you want to use a wired connection, connect a pho-
no cable between the source and the subwoofer.
If you want to connect the subwoofer wirelessly, you
can skip this step.
XW-700 / XW-900
LINE IN
L_in
R_in
Quick Start Guide
Instruction manual
0
0,8 m
1,6 m
0
1/5
2/5
0
0
1,2 m
1/5
2,4 m
2/5
3,6 m
3/5
4,8 m
4/5
6 m
1
Power connection
The supplied power cable is connected to subwoofer on the back-
side in order to provide connection to the power grid.
Turn on the subwoofer by switching the power-switch to the ON
position
2,4 m
3,2 m
4 m
3/5
4/5
1
ON
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the nuSub XW-700 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nubert nuSub XW-700

  • Page 1 11/2019 EN nuSub XW-700 / XW-900 Active Subwoofer Quick Start Guide Instruction manual 1.Placement First, place the subwoofer at the intended location. 0,8 m 1,6 m 2,4 m 3,2 m In the following, we will give you a few helpful hints: Placement and Sound When you place one or more subwoofers in a room you have differ- ent options, depending on what you want to achieve.
  • Page 2 XW-700 / XW-900 · Commissioning · 11/2019 EN 3. Wireless connection LEVEL (green) SOURCE/PAIR LINE IN FREQ (blue) Press and hold the SOURCE/PAIR button for 3 seconds to start the pairing-process. L_in (90) The Subwoofer will begin searching for a compatible wireless Mas-...
  • Page 3: Application Examples

    140 Hz. • LEVEL setting on the subwoofer: sets the relative level of the Example 2: Wired connection between a nuSub XW-700 subwoofer, e.g. -12 dB. (LINE IN) and a pair of nuBox A-125’s (or an AS-225) The loudspeaker automatically applies an 80 Hz high-pass filter as soon as a cable is connected to the SUB OUT phono connector.
  • Page 4 11/2019 EN 7. Using the Nubert X-Remote App You can also use the Nubert X-Remote App to set up and adjust the subwoofer. The app is available for free at the Google Play Store or at the Apple App Store. The app offers more settings and...
  • Page 5 Devices with this symbol may only be used in a dry indoor environment. ucts) is considered improper and may result in property damage or even personal injury. Nubert electronic GmbH does not assume any liability for damages caused by improper use.
  • Page 6: Installation Instructions

    • Should the loudspeaker come into contact with liquids or should objects have got inside, please unplug the mains plug immediately and contact Nubert elec- • The loudspeaker smells burnt, develops smoke or makes unusual noises. tronic GmbH (info@nubert.de)!
  • Page 7 Master device. The standby power consumption is in this case 1,8 Watts. Service The auto-off function can be deactivated in the app. If you have any questions or problems during the commissioning of your Nubert system, please do not hesitate to contact our service team: Auto-on Phone:...
  • Page 8 You can send the device to the municipal collection points to be collected separately from unsorted municipal waste for reuse. Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.

This manual is also suitable for:

Nusub xw-900

Table of Contents