Table of Contents
Advertisement
CONVENIENT FUNCTIONS
The following functions are available
from the remote control handset only.
14
5P31101C P08-17
TV/AV Selection
CHANNEL RETURN
DISPLAY
MUTE
SKIP FUNCTION
After all channels available in your area have been set in
memory, you can skip unwanted channels as follows.
1
2
3
NOTE:
To cancel the SKIP function, press Direct Channel Selection
buttons to select the channel which you want to cancel, then
press CANCEL again.
14
For receiving the desired signal:
Press 0/AV to select the TV or AV mode.
+0 #
TV position - to view a
normal TV program.
This button allows you to go back to the previous channel
by pressing CH RTN. Press this button again to return to the
channel you were watching.
When you press this button once, the channel number will
appear. Press this button again, then the display will disap-
pear.
When MUTE is pressed, the TV sound will be turned off
completely. To disable this function, press the button again
or VOL + or –.
Press CH + or – to select the channel which you want to skip.
Press CANCEL.
When a channel is skipped, the channel number will blink.
Skip all unwanted channels the same way following steps
1-2.
6/6/06, 10:09 AM
)8
AV position - to receive
through the direct Video
input. AV1 (from 21 pin
SCART socket on the rear)
or AV2 (from Audio/Video
in jacks on the front)
indicator appears on the
screen in AV mode.
Advertisement
Table of Contents
