Page 1
GE370 – GEMINI ELECTRONIC: BASIC PROGRAMMING STEPS Out of the box, the GE370 is already programmed with a default master code (11 33 55 77) and a default user code (22 44). It is highly recommended by the manufacturer that both of these codes be changed immediately by the user after installation.
Page 2
“Public” and “Private” modes: The GE370 is set to “Public” mode by default, which means you must enter the user code once to unlock and enter it two times consecutively to lock after turning the knob back to the locked position. You can change your lock to “Private”...
Page 3
If you change back to Public mode, the user code will be what Public mode was originally programmed to.*** This is an overview of the basic programming functions on the GE370 digital lock. For more advanced programming, please refer to the manufacturer...