General Assembly - Kerstar PCV1 Operating Instructions Manual

ENGLISH
GB
UNPACKING YOUR CLEANER
Unpack your cleaner and ensure that you have a complete set of accessories as listed below:
1 25mm x 2.5m Antistatic Crushproof Hose Assembly
1 32mm Antistatic Crevice Tool
1 32mm End Brush for Crevice Tool
1 32mm Compact Dusting Brush
1 Spare Paper Bag
2 Self Adhesive Sealing Discs for Paper Bag
Optional extras:
1 Flexiclean Nozzle & Brush
1 Anti-Static Wristband & Yellow Coily Lead
1 Packet of 10 Disposable Paper Bags

GENERAL ASSEMBLY

1. Hose
Lift the fl ap at the right hand end of carrying case and insert either end of the suction hose
into the suction end cap.
2. Accessories
Attach appropriate nozzle to the end of the hose.
3. Coily Lead & Wristband
Connect the coily lead to the earth stud by the switch and the wristband to the coily lead to
dissipate any static build up in the user.
OPERATING INSTRUCTIONS
1. Connection to the Electricity Supply
Insert the mains plug into a suitable socket outlet. When you have fi nished cleaning, unplug the
appliance. When coiling the mains cable make sure that any twists or knots in the cable come
out at the plug end. DO NOT coil cable from the plug end as all twists and knots remain in the
cable and considerably shorten its life.
2. Cleaner Controls
The following controls are provided:
a) The on/off switch is situated toward the rear of the casing. To switch the appliance on fi rmly
press the raised portion of the rocker.
b) The speed control is situated near the on/off switch. It is used to control the suction
power generated.
4