Advertisement
JAGUAR E - TYPE : Assembly Instructions 6
Attach 7-F / 7-G by gluing
the 7-L glue tabs to the underside.
Stick the 7-L glue tabs along
the edges of 7-F / 7-G.
*Attach the glue tabs so that
they overlap each other.
The reverse side
7-LGlue spot
7-F/7-G
7-F/7-G
Attach 8-F to the
glue tabs on 3-C.
7-A
8-F
Cut away any protruding
glue tabs.
Align 8-L / 8-K very carefully
with the area circled, and attach.
7-F/7-G
7-LGlue spot
Canon ® is a registered trademark of Canon Inc.
7-F/7-G
8-L/8-K will protrude as shown in the circled area.
This we be attached to 8-F in a later step.
7-L/7-K
Glue the upper and lower glue tabs of
8-F to the center panel.
Attach 8-F to the glue tabs on 3-C/7-A.
The area along the blue line does not need
to be glued down. 7-A's purpose is to make
the rear body stronger.
It is best if 8-F is slightly separated from 7-A.
M.Kajiwara
8-F
Advertisement
