Advertisement
JAGUAR E - TYPE : Assembly Instructions 13
14-B
First, glue only the
area of 13-F indicated
by the blue line.
13-F
Align the center lines
printed on each part
when attaching.
14-I/14-J
Before attaching 14-I/14-J,
insert them into the body
and confirm the position
they should be attached.
Once you have decided where,
use the glue tabs to attach them.
13-D
Attachment of 13-D
should begin from
the joint between
If 14-D / C covers
13-B and 14-D.
the triangular parts
to be cut out of 14-B,
cut the overlap away
in line with the triangle,
after gluing.
14-Y
Push out the unglued parts of
13-F from underneath,
align them with the curve on
13-C and 13-B and attach.
If the area indicated by blue lines
on 13-C / 13-B protrudes further
than 13-F, cut off the excess keeping
in line with the curve.
14-K/14-L
14-J(Right)
Canon ® is a registered trademark of Canon Inc.
13-B
13-D
14-D
14-C
14-Y
13-C
Attach with the glued
join facing downwards.
Attach the light here.
Insert the light
to the point
shown.
M.Kajiwara
Glue to the underside
of the area indicated
with blue lines.
13-A
13-B
Once you have attached 13-F,
cut out the lights, leaving
the glue tabs in place.
Confirm the position
before attaching.
Advertisement
