Advertisement
Dear customer,
Congratulations on your decision to purchase a n-by-Naber Concept
Kitchen!
With the Naber Concept Kitchen you get an innovative furniture system
which can be disassembled without tools, made of powder-coated sheet
steel, equipped with work surfaces made of laminate, stainless steel and
powder-coated sheet steel.
High-quality materials, a multi-award-winning design and a careful choice
of colours characterise this new type of modular system for use in the
living and indoor area.
We have placed particular value on material quality and durability in
the production of the components to ensure long-term enjoyment of
your Concept Kitchen. We have applied the most modern manufacturing
processes and have followed the tradition of the best metal furniture
workmanship skills to produce the individual elements in a sustainable
and environmentally friendly manner.
All of the Naber Concept Kitchen components can be sorted and recyc-
led as reusable materials at the end of the service life.
Please carefully read the following instructions on assembling the modu-
les (Section 1) and our handling and care instructions (Section 2) before
starting assembly and store them for future reference.
Damage which occurs due to lack of care or due to non-compliance with
the measures and recommendations relating to the acceptance (storage),
installation, use, maintenance and storage of the furniture are usually not
covered by the seller's legal warranty or by any guarantees given.
Edges or discolorations that are not reported when unpacking (including
surface damage caused by storage in rooms with high temperature and
humidity) are not usually covered either by the seller's legal warranty or by
any guarantees given.
And please note:
Keep packing materials and plastic wrappers out of the reach of children.
Dispose of packing materials in accordance with the legal regulations.
1. Important information for assembling the modules
We recommend that you unpack your furniture with the utmost care so as
not to cause any damage.
Scratches on the modules that are caused by a cutter, a knife or scissors
are not usually covered either by the seller's legal warranty or by any
guarantees given.
Please follow the installation instructions precisely, because neither the
seller nor the manufacturer take over liability for material defects that are
caused by incorrect assembly!
Requirements for the wall, floor and room ceiling condition
wall brackets!
depending on the wall quality.
Naber Concept Kitchen components to the wall or room ceiling.
Electrical connections and water connections
connections and water connections!
national building codes (DIN VDE 0100-724)!
Loading capacity of the shelves
The loading capacity of the shelves for Module A
(1330 x 640 x 30 mm) is 80 kg.
The loading capacity of the shelves for Module B
(730 x 640 x 30 mm) is 80 kg.
2. Important handling and care instructions
The following generally applies for the cleaning of coated and textured
surfaces:
all washing and cooking work. Please dry any water immediately to
prevent swelling of the work surfaces due to moisture penetration.
and care of the coated and textured surfaces of the module
components.
GB
born stains. Wipe with absorbent fleece after cleaning so that no clean-
ser residues remain on the surface and to prevent smears from forming.
level changes in the textured surfaces.
cleansers. We cannot assume any guarantee or warranty for the
Please also note the following handling and care instructions for special
materials!
Powder-coated surfaces
cleansers, cleansers containing salmiak, nitro or synthetic resin
dilutions (as well as cleansers based on nitro or containing
trichloroethylene), chlorinated cleansers, polishes, waxes or steam
cleaners – they destroy the surface structure of the (powder) coating.
radiation.
intensive use are a natural phenomenon of the material used (iron) and
do not constitute functional impairment
to the material.
Laminated plastic surfaces
(HPL; high-pressure laminated press boards or high-pressure laminate;
work surfaces, coloured and white, smooth)
process ensures strong adhesion of the laminated plastic to the support
material. The bond is water resistant based on DIN/EN204 (D1, D2,
D3 and D4) and heat-resistant, for brief periods up to 120° Celsius
(393 Kelvin, 248° F).
generally not necessary to use care products for this.
possibly a household cleanser without abrasives to remove light, fresh
or common stains. Wipe again after cleaning with clear water to remove
all cleanser residues and prevent the formation of smears.
scrub sponges). They destroy the laminated plastic surface and can
lead to changes in the gloss level!
as silver polish or oven cleaners)!
cleansers. We cannot assume any guarantee or warranty for the
Stainless steel surfaces
the work surfaces and sinks.
of the stainless steel surface!
stainless steel work surfaces and sinks. Wipe with clear water after
cleaning and rub dry with a clean cloth.
from your kitchen professional or on the Internet) for caring for stainless
steel surfaces.
sponges or sandpaper. They can contain iron particles, referred to as
„ferrite", which can damage the protective passive layer of the stainless
coast can also lead to corrosion in stainless steel.
cleansers. We cannot assume any guarantee or warranty for the
Advertisement
