Calling A Skype User - Acorp VS300-S User Manual

> Sounds and Audio Devices (or Sounds and Multimedia) > Audio and select a
desired device in the Sound playback section

Calling a Skype User

Prerequisites
To call a Skype user, you have to launch Skype and log in to Skype. And you
should have added desired Skype user(s) to your contact list.
Loading the Contact List on LCD Display
1. Press the Contact List key (Right Key) to load the Skype contact list.
Only one contact is displayed at a time. You can press Contact List key
again to switch between Skype Friend List, Outgoing Call List, Incoming
Call list and Missed Call List. The top-right icon indicates the online status of
the contact.
Echo / Sound Test
Service
2. Scroll with Up / Down to reach the desired contact. (To exit the contact list,
press the
3. To call current contact, just press the
communication, the screen is as below.
Echo / Sound Test
Service
4. When the call is answered, appears on the screen. You can start the
communication now. To end the call, press .
Echo / Sound Test
Service
means online while
key.
means offline.
key. While establishing the