Folding The Handle - Toro 20838 Operator's Manual

1. Washout port
4. Turn the water on.
5. Start the engine and run it until there are no more
clippings that come out from under the machine.
6. Shut off the engine.
7. Shut off the water and disconnect the garden
hose from the machine.
8. Start the engine and run it for a few minutes to
dry the underside of the machine.
9. Shut off the engine and allow it to cool.

Folding the Handle

WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button (if equipped);
refer to Figure 23.
Figure 22
g014538
1. Electric starter
2. Loosen the handle knobs.
3. Rotate the entire handle forward
Important:
of the handle knobs as you fold the upper
handle.
4. Rotate the upper portion of the handle back
toward the engine; refer to
1. Handle knobs
15
Figure 23
2. Electric-start button
(Figure
Route the cables to the outside
Figure 24
Figure 25.
Figure 25
g186627
24).
g038688
g038687