Installation Of The Appliance - Horus Firebox Sheet Of Use And Maintenance

4. MOUNTING OF THE APPLIANCE
4.1 Before proceeding with the assembly of the device and its positioning,
carry out a general check of all the parts supplied.
4.2 If during the control problems arise, please contact the Authorized
Dealer or the Manufacturer, always mentioning the product model
1
2
11
~ 2 / 3mm

5. INSTALLATION OF THE APPLIANCE

Per i modelli appesi:
1
2
Ø12
3
4
BUILT IN FIREPLACES:
• realize an appropriate seat within the containment structure adapted to
support the weight of the fireplace
• fix the fireplace inside the containment structure, in such a way that it is
impossible the overturning
• assure the recirculation of air in the containment structure by providing the
same with an air intake in the part below the fireplace, with a total area greater
than 200 cm2 and a upper airflow to evacuate the heat of equal dimension (in
the highest part of the compartment ). The flow of air which enters cold from
below and for normal convective motion exits warmer from above, ensures
the maintenance of a correct temperature, preventing overheating.
*
*
Solo su mod. Opera
12