Download Print this page
Haws 1900 Installation, Operation & Maintenance Instructions Manual

Haws 1900 Installation, Operation & Maintenance Instructions Manual

Bottle filler

Advertisement

Quick Links

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail:
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS,
Sparks, Nevada. HAWS will not be liable for any damages caused by defective
materials or poor workmanship, except for replacements, as provided above. Buyer
agrees that HAWS shall not be liable for general, special, or consequential damages
claimed to arise under the contract of sale. The drinking fountain manufactured by
HAWS is warranted to function if installation and maintenance instructions provided
are adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:
FOR CUSTOMER SERVICE:
04/17
haws@hawsco.com
Model 1900
Bottle Filler
LIMITED WARRANTY
1-800-766-5612
1-888-640-4297
Model 1900
INSTALLATION, OPERATION
MAINTENANCE INSTRUCTIONS
 website:
www.hawsco.com
&
No. 2076963(4)
Page 1 of 18

Advertisement

loading

Summary of Contents for Haws 1900

  • Page 1 Haws within a reasonable period after receipt of the product. Where claims for defects are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection.
  • Page 2: Other Tools

    ABS cement, reciprocating saw or utility knife, hack saw or utility knife, slip joint pliers. LOCATION OF UNIT: The Model 1900 bottle filler is a wheelchair accessible drinking water bottle filling facility. The height dimensions shown meet current ADA requirements. When installing this unit, local, state or federal codes should be adhered to.
  • Page 3 Clean off any visible RTV. Allow the RTV to cure for 24 hours before running water through the drain. Note: The RTV shown in these pictures is white instead of clear, for the purpose of clarity. Groove RTV bead (laid right up alongside the groove) 04/17 Model 1900 Page 3 of 18...
  • Page 4 48” is the ADA maximum for wheelchairs for obstructed forward reach height. For ADA side reach compliance, reduce this height to 46” or less (may not be possible with all water coolers or fountains). 04/17 Model 1900 Page 4 of 18...
  • Page 5 Mount the bottle filler to its frame with the supplied #8 x 1/2" flat head screws (qty. 4). Rear drain only: Connect the drain plumbing. Step 5: Testing: Turn on the water supply. Press the push button to dispense water; check both the inlet plumbing and the drain for leaks. 04/17 Model 1900 Page 5 of 18...
  • Page 6: Troubleshooting

    For more information about Haws products, see our website: www.hawsco.com ® Corporation – All Rights Reserved © 2017 Haws ® HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation. 04/17 Model 1900 Page 6 of 18...
  • Page 7 04/17 Model 1900 Page 7 of 18...
  • Page 8 04/17 Model 1900 Page 8 of 18...
  • Page 9 04/17 Model 1900 Page 9 of 18...
  • Page 10 04/17 Model 1900 Page 10 of 18...
  • Page 11 04/17 Model 1900 Page 11 of 18...
  • Page 12 04/17 Model 1900 Page 12 of 18...
  • Page 13 04/17 Model 1900 Page 13 of 18...
  • Page 14: Parts Breakdown

    BOTTLE FILLER, EWC RETROFIT APPROVED DATE 07/06/17 SCALE: DRAWING TYPE: PARTS BREAKDOWN SIZE: A SHEET 2017 Haws Corporation - All Rights Reserved PAGE 14 of 18 HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
  • Page 15 DATE: CHK'D.: REVISION 2/10/14 BOTTLE FILLER, EWC RETROFIT APPROVED: DATE: 07/06/17 SCALE: DRAWING TYPE: INSTALLATION SIZE: A SHEET 2017 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
  • Page 16 DATE: CHK'D.: REVISION 2/10/14 BOTTLE FILLER, EWC RETROFIT APPROVED: DATE: 07/06/17 SCALE: DRAWING TYPE: INSTALLATION SIZE: A SHEET 2017 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
  • Page 17 CUTTING THE MOUNTING FRAME RELIEF REVISION 2/10/14 BOTTLE FILLER, EWC RETROFIT APPROVED: DATE: 07/06/17 SCALE: DRAWING TYPE: INSTALLATION SIZE: A SHEET 2017 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
  • Page 18 DATE: CHK'D.: REVISION 2/10/14 BOTTLE FILLER, EWC RETROFIT APPROVED: DATE: 07/06/17 SCALE: DRAWING TYPE: INSTALLATION SIZE: A SHEET 2017 Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.