Subscribe to Our Youtube Channel
Related Manuals for Aeotec Siren 6
Summary of Contents for Aeotec Siren 6
- Page 1 Aeotec Siren 6. Aeotec Siren 6 was developed to work as a doorbell or siren via Z-Wave Plus. It is powered by Aeotec’s Gen5 technology and features Z-Wave S2.
- Page 2 Get to Know your Siren. Pre-loaded Tones. Tone # Name Ding Dong Doorbell Ding Dong Tubular Bell Doorbell Traditional Apartment Buzzer Doorbell Electric Apartment Buzzer Doorbell Westminster Chimes (Hearing Doorbell Enhanced) Chimes (Hearing Enhanced) Doorbell Cuckoo (Hearing Enhanced) Doorbell Traditional Bell Doorbell...
- Page 3 Keep product away from open flames and extreme heat. Avoid direct sun light or heat exposure. Siren 6 is intended for indoor use in dry locations only. Do not use in damp, moist, and / or wet locations.
- Page 4 5. If Siren 6 has successfully paired to your Z-Wave gateway, the LED on Siren 6 will emit a solid color for 30 seconds, then turn off. If in the case that the Siren 6 failed to pair, LED will continue to...
- Page 5 Test Siren 6 sound manually. You will be able to manually test your Siren 6 unpaired or paired to a Z-Wave network, to determine if its sound is working, perform the button action listed below: •...
- Page 6 Low battery indicator for Button #1 - #3) Siren 6 has 3 low battery indicators for 3 possible button slots. This will indicate if battery is low on any connected button to Siren 6. Button 1 • LED blinks once (100ms), then no LED for 5 seconds. Repeats continuously until replacement of battery.
- Page 7 Z-Wave Plus: Yes Z-Wave Security: S0, S2 unauthenticated, and S2 Authenticated Z-Wave Hardware: ZM5101 Z-Wave Library Type: Enhanced 232 Slave Z-Wave Device Type: Sound Switch Z-Wave Role Type: Always On Slave. Smart Start Compatible: No Input Voltage: Adapter: 5V/2A Battery: 3.7V Backup Battery: PT502035 400mAh...
Need help?
Do you have a question about the Siren 6 and is the answer not in the manual?
Questions and answers