XCEL UNIVERSAL POST Installation Manual

FOR ORNAMENTAL FENCE/GATE USE
(Universal Post – Can be used for Line, End, and/or Corner Post)
Please read these instructions carefully before installing your fence panels. If you have any
questions or need assistance with installing the fence, please contact us at 866-392-0808 for
assistance. Installation video also available via e-mail.
Item Description
Fence installation and assembly has never been so easy to install until now. Our universal posts allow you to
set and mount your posts quickly and easy. Without having to figure out whether a post is a line post, or a
corner post, you can set our posts universally and with no mistakes every time. Built from strong wrought
iron, pre-galvanized inside and out, double-powder coated, black.
Features

Choose from in-ground installation or on
concrete with available floor flange

Pre-mounted base floor flange also available

Choose from 4'H to 8'H Models
Please read these instructions carefully before installing your XCEL Fence. If you have any questions or
issues installing the fence, please contact us at 866-392-0808 for assistance.
Before You Begin ...
Check your local zoning laws.
 Local zoning laws and HOA may regulate the
location, type and height of your fence.
 If needed, contact local utility companies for
assistance in clearing electrical, gas or water
lines to avoid
underground utilities.
INSTALLATION GUIDE
"UNIVERSAL POST"
hitting any unseen
1

No Welding or Painting Required (Powder
Coated Black)

On-site assembly

Zero Maintenance

Easily Transported/Compact Box
Sketch Plan and confirm materials
 Draw and sketch out your fence plan. Plan
the location of corners and gates.
 Measure accurately with tape measure and
identify all measurements on your drawing.
 Make sure all location of fence lines and
gates are carefully planned.
 Determine total number of sections and
posts needed.