Safety Features; Operation - Beem HF-929TS Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22
EN
Removing Production Residues
Before you fi rst enjoy any fried food, we recommend that you carry out a trial run to
remove any possible production residues.
To do this, allow the device to heat up on the highest temperature setting for approx.
15 minutes without any food in it (see the "Using the Device and Preparing Food" chapter).
Make sure that the room is well ventilated as you do this!
When the device is fi rst used, production-related additives (e. g. grease) may cause
a small amount of smoke and / or an odour to be produced. This is normal and not
a device defect.

Safety features

The device is equipped with an internal timer. Once the timer time which is set has
elapsed, 5 beeps sound and the supply of heat is automatically switched off. The fan
and the device switch off automatically after 20 minutes. In order to switch the device
on again, you touch
chapter).
The device switches off automatically when the drawer (2) with the basket insert (6)
is removed. If the drawer is inserted into the device once more, the programme
which has been set continues until the time that has been set expires or the device is
switched off manually (see the "Operation" and "Using the Device and Preparing Food"
chapters).

Operation

Programmes
The device has 8 different programmes:
Programme
Manual
Chips
Meat
Prawns
Cake
Chicken
Steak
Fish
01359_DE-EN-FR-ES-IT_A5_V2.indb 26
01359_DE-EN-FR-ES-IT_A5_V2.indb 26
Field
(15) (see the "Using the Device and Preparing Food"
Temperature
(pre-set)
180 °C
180 °C
180 °C
160 °C
160 °C
200 °C
180 °C
160 °C
26
Duration
(pre-set)
15 mins
18 mins
25 mins
20 mins
30 mins
20 mins
20 mins
20 mins
14.05.2018 14:07:39
14.05.2018 14:07:39

Advertisement

Table of Contents
loading

Related Products for Beem HF-929TS

Table of Contents