Baumatic BR221.3A Instruction Manual page 26

Tilt the appliance backward at a maximum angle of 35°. Unscrew
o
the leg support screws (C) - left and right, and remove the leg
support cover (D). Then place it on the opposite side. Unscrew,
remove an d then replace the position of the en
decorative peg (F) (for models wi
Unscrew th e three screws fixing the bo
the bottom hinge on the opposite side.
Repeat the procedure 3 and 4 on the bottom door. In case there
o
is no bottom door limit peg, transfer the bearing (G) and washer
to the opposite side of the door.
To fit the doors on the opposite side of the fridge freezer proceed
o
with the above procedure in reverse.
d switch (E) and
th forced door closing system).
ttom hinge and then fix
26