Page 12
Documentation. Each tab has its own toolbar with functions dedicated to that view. 6. The GPR4 Record tab has standard A-scan and B-scan plots that are customary for most GPR systems. The plot parameters can be changed by pressing the Plot parameters button (see Figure 5).
Page 14
D-000002-000021 Earth Science Systems, LLC February 29, 2019 The GPR4 Record tab also has buttons for saving the B-scan image and generating a short report . The image can be saved as a PNG, BMP, or JPG file. The report will be saved as a PDF file, and will contain the survey metadata and the B-scan image.
5. The acquisition program has several views that can be selected by clicking on the appropriate tab on the top of the screen: Survey Grid, GPR4 Record, and optionally Documentation. Each tab has its own toolbar with functions dedicated to that view.
Page 16
D-000002-000021 Earth Science Systems, LLC February 29, 2019 6. The GPR4 Record tab has standard A-scan and B-scan plots that are customary for most GPR systems. The plot parameters can be changed by pressing the Plot parameters button (see Figure 5). For most users, the default settings will be sufficient.
February 29, 2019 4.4 Replaying Data The ESS Concrete Scanner allows replaying data so that plots can be re-examined and new reports can be generated. To replay data, follow the instructions below. 1. Insure that the scanner unit and odometer are switched off.
Bluetooth adapter (if present). The electromagnetic radiation from ESS GPR radar sensors is many times less than that from cellular telephones. ESS GPR systems can be operated anywhere cellular telephones are permitted. The health and safety hazards posed by ESS GPR systems are less than those posed by cellular telephones.
ESS or its dealers, distributors, agents, or employees, assume the entire cost of all necessary servicing, repair or correction. ESS 's obligation is limited to repairing or replacing parts or equipment which are returned to ESS, transportation and insurance pre-paid, without alteration or further damage, and which in ESS 's judgment, were defective or became defective during normal use.
The JobInformation dataset contains information about the jobsite. There is a folder for each data server (e.g., gpr4, odometer, irTemperature, pavementDensity, etc.) on each node (e.g., the logger or the probe), and each folder contains configuration information and data.
Need help?
Do you have a question about the GPR4 and is the answer not in the manual?
Questions and answers