Before Use For The First Time; Operation And Controls - Princess 2954 User Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
General
This attractive Princess New Classics
Kitchen Scale is one of the products in our
New Classics range, all of which are
finished in sturdy chrome-plated steel. You
can use your Kitchen Scale to weigh
products to 5000 g/176 oz. It also includes
a handy kitchen timer.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 On/off and reset button
2 g/oz and start/stop button
3 Timer -
4 Timer +
5 Weighing platform
6 Cover
7 LCD display
8 Cover for four 1.5 V batteries
9 Container for loose products.
See Figure 2.
The LCD display has the following
functionalities:
1 Battery indicator
2 Units of weight (g or oz)
3 Units of time (min and sec)
4 Display of weight or time
5 Spanner (in the event of malfunction)
6 Minus sign (for negative weight)
7 Indicator for timer mode.
4
New Classics Kitchen Scale Article 2954

Before use for the first time

See Figure 3.
1 Remove the packaging.
2 Remove the battery cover at the rear of
the appliance.
3 Fit four 1.5 V batteries as indicated on
the appliance.
4 Fit the cover to the battery
compartment.
Use
• Place the appliance on a hard and
level surface, as free from vibration as
possible.
• Put the appliance in a place where it
cannot fall off the worktop.
Weighing products
1 Open the cover.
2 Press the on/off and reset button to
switch on the appliance. '888' will be
shown on the display, and '0g' will then
be shown after 1 second (default
display).
3 Press the g/oz and start/stop button to
switch between g and oz. The selected
unti is shown at the top of the display.
You can change units at any time you
wish.
4 To weigh loose products such as rice,
slide the container out of the front of the
appliance and put it on the weighing
platform.
5 Reset the appliance by briefly pressing
the on/off and reset button. This sets
the weight to '0'. You can use this
button at any time you wish.
6 Put the product on the weighing
platform or in the container (where
relevant). On weighing product with a
weight of more than (5000 g/176 oz)
'EEEE' will be shown in the display.
Reset the appliance by pressing the on/
off and reset button. The default display
will be shown. You can now weigh a
new product using the above
procedure.

Advertisement

Table of Contents
loading

Table of Contents