GROLAB POWERBOT Installation Manual page 10

Never positon the sensor too close to a light Never positon the sensor too close to a light
EN
source, wet it, or put it in high (90%~100%) source, wet it, or put it in high (90%~100%)
ES
humidity values for a long periods of me, humidity values for a long periods of me,
this can damage your sensor. t
FR
18
Connect your peripherals to the module's Connect your peripherals to the module's
p power outlets (11). Each outlet has a iden fi-
cator and a LED displaying the output state cator and a LED displaying the output state
(9). Each output is configurable via so ware, (9). Each output is configurable via so ware,
so you can plug any device to any outlet. s
If you connect mul ple devices to one outlet, If you connect mul ple devices to one outlet,
remember not to surpass the power limits, r
which is for each outlet and in total per which is for each outlet and in total per
module: m
2 2300W (230
9
v
- EU) / 1100W (110
AC
-
9
11
,
v
- USA) )
AC