Setting Batteries - Hitachi PC-LH3A Operation & Installation Manual

● Do not turn ON the power source, unless the preparation for test running is completed.
● Read this manual carefully before installation work for correct performance.
● Read this manual together with the "Installation & Maintenance Manual" of the indoor unit.
1. Before Installation and Operation
This packing contains the following parts. Check the contents and the number of the parts.
Name
Wireless Remote Control Switch
(Controller)
Holding Bracket
Battery (AAA/ 1.5V Dry Cell)
Screw

2. Setting Batteries

Set the batteries (AAA/1.5V52) for the controller as
follows.
(1) Remove the battery cover by sliding toward the
arrow direction by pushing the part of the cover as
shown in the right figure.
(2) Set the batteries. (Insert the batteries according
to the marks of + and - on the case.)
Q'ty Remark
1 For Operation Control
1 For Controller
2 For Power Source of Controller
2 For Fixing "Holding Bracket" onto Wall
2
Slide the cover in
the arrow direction
with pushing.
AAA Batteries