Assembly - Bissell POWERFORCE 1668 Series User Manual

Assembly

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
You will need the following to assemble:
Handle & Hose
Body
1
2
1
1 - Connect one 2 - Connect both
extension wand extension wands
to the handle. together.
2
To connect hose,
find the hose
connector location
on top of unit.
4
Attach floor
tool to hose
and slide in
holder on
back of unit
to store.
www.BISSELL.com
6
Extension Wands
Floor Tool
3
3 - Connect the 4 - To use 2-in-1 tool,
bottom extension attach to end of
wand to floor tool. wand when needed.
3
"Click"
Floor Tool Cleaning Modes:
5
1
1 - Hard Floor Cleaning Mode 2 - Carpet Cleaning Mode
Maintenance:
WARNING
To reduce the risk of electrical shock, turn power switch o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
2-in-1 Tool
3
4
Twist right
until you hear
Lift canister door to access the bag.
a click to
secure.
5
2
Replace bag in unit by sliding back in place
and closing lid.
Replacement Bags (x3) - 160-8099
Changing Bag
2
4
Lift
to open
Bag
Pull handle
to open
To remove bag,
slide towards
back of unit.
www.BISSELL.com
7