PAVO Stripmaster 12 Manual page 3

Read all instructions before use
Do not leave cable where other may trip
Do not attempt to open casing
Do not use if wet
Switch off and unplug when not in use
Keep plastic bags away from children
and pets
Do not use near heat or water source
Before shredding it is advisable to carry out a test with 1 page to familiarise yourself and to make
sure that your machine is working correctly.
1. Remove all packaging, place the shredder head on the top of the basket and
plug the machine into an appropriate socket.
2. Set the main switch on the Auto position. Your machine is ready to be used.
3. Insert maximum 12pages of papers 80gr or 1 CD/CC.
4. Turn off and unplug the machine when not in use.
5. Empty bin regularly
The Switch located on the top of the shredder has 3 settings.
1. When set on AUTO, the shredding process is started automatically by inserting the paper into the
feed opening. The shredder will stop automatically when the paper has completed its travel
through the feed opening.
2. REV is used to assist in the removal of a paper jam, which reverses the shredding process prior
to a completed cycle, thus clearing the cutters.
3. OFF position is recommended when emptying the wastebasket or when the shredder is not in use
for a prolonged period of time.
The machine will automatically switch off power to avoid the overloading of the motors, after 1min
of continuous use. After approx 15mins it will re-set itself.
SHREDDING MACHINE
S
AFETY
Do not touch cutters even when unplugged
Do not use aerosol sprays, flammable products or
canned air near your shredder
Do not touch the casing when the machine is working
Do not put any items (other than specified) through the
cutters
Do not use if machine, cable, or socket is damaged
Keep your Hands / Hair / Tie / Jewellery away from the
feed opening to prevent injury
O
PERATING INSTRUCTIONS
O I
THER NFORMATION
N
OTICE
3