VALBERG PS310 User Manual page 38

2. Master and user code
2.1 Setting the master code
Make sure that the safe door is open when you change the code. To open the safe press ON, key in the master
code (or factory code 123456 if you use the lock for the first time) and press ENTER.
Step
Press ON
1.
Press Enter
2.
Press 1
3.
Press Enter
4.
Key in the new master code (or factory code,
5.
123456 if you use the lock for the first time)
Press Enter
6.
Key in the new master code, e.g. 567891
7.
Press Enter
8.
Repeat the new master code, e.g. 567891
9.
Press Enter
10.
The new master code is now set. If the new code is not accepted, you hear a long signal and a red light flashes.
In that case, start again at step 1 for changing the master code. After changing the code, it is best to test the new
code several times with the door open.
38
Action Key
ON
Enter
1
Enter
123456
Enter
567891
Enter
567891
Enter
Signal