Outbound 081-3852-0 Installation Instructions For Replacement page 2

OWNER'S MANUAL
5) Remove the Motor Seal Nut by turning it clockwise. Do not pull
or push the canister, as this can cause damage between the
canister and pool liner.
3. Assemble the Sand Filter or RX Filtration System according to the owner's manual instructions.
4. Attach your new filter to the SFX Canister as indicated below:
SAND FILTER
RX PUMP
WATER OUT
5. Refer to the instruction manuals and make sure that all connections are firmly secured.
6. Plug in the Sand Filter or RX Filtration System, and enjoy!
2
Motor Seal Nut
WATER OUT
WATER IN
WATER IN
How to connect a Sand Filter or RX Filter to your SFX Filter
6) Remove the SFX Motor Assembly, and seal the Canister opening
with the Seal Plate. Fasten the Motor Seal Nut tightly to ensure
that no water leaks.
SFX
POOL
TM