Outbound 081-3852-0 Installation Instructions For Replacement

Sfx filter to sand filter or rx filtration system

Hide thumbs Also See for 081-3852-0:

Available languages

Download this manual

DO NOT RETURN PRODUCT TO STORE

To replace your existing SFX Filter to a Sand Filter or RX Filter, simply assemble the new filter according to

the following instructions.

1. Unpack the new filter you've purchased, and locate the round Seal Plate included.

2. Replace the SFX Motor with the Seal Plate following the steps shown below:

1) Insert the Water Stopper into the pump's water intake. Push the

stopper tightly into the Skimmer Seal Ring.

Water Stopper

Skimmer Seal Ring

RF Service Plug

3) Detach the Locking Ring and RF Diverter by turning

counter-clockwise. Insert the RF Service Plug.

IMPORTANT:

Please read this manual carefully

before beginning assembly of this

product. Keep this manual for

future reference.

SFX FILTER TO SAND FILTER

OR RX FILTRATION SYSTEM

INSTRUCTIONS FOR REPLACEMENT

Model No. 081-3852-0

Top Cover

2) Unplug the power.

Locking Ring

RF Diverter

4) Remove the Top Cover, Strainer Basket, and Filter Cartridge.

Use a water container (e.g. a bucket, not included) to collect

the purged water resulting from servicing the pump.

Customer Service: 1-866-567-4089

Trileaf Distribution

Trifeuil Toronto, Canada

M4S 2B8

Page 1 SFX FILTER TO SAND FILTER OR RX FILTRATION SYSTEM INSTRUCTIONS FOR REPLACEMENT Model No. 081-3852-0 DO NOT RETURN PRODUCT TO STORE To replace your existing SFX Filter to a Sand Filter or RX Filter, simply assemble the new filter according to the following instructions.
Page 2 OWNER’S MANUAL Motor Seal Nut 5) Remove the Motor Seal Nut by turning it clockwise. Do not pull 6) Remove the SFX Motor Assembly, and seal the Canister opening or push the canister, as this can cause damage between the with the Seal Plate.
Page 3 FILTRE SFX AU FILTRE AU SABLE OU AU SYSTÈME DE FILTRATION RX INSTRUCTIONS POUR LE REMPLACEMENT N° de modèle : 081-3852-0 NE RETOURNEZ PAS L’ARTICLE AU DÉTAILLANT Pour remplacer votre filtre SFX par un filtre à sable ou un filtre RX, assemblez simplement votre nouveau filtre en suivant les instructions suivantes.
Page 4 MANUEL DE L’UTILISATEUR Écrou d’étanchéité du moteur 5) Dévissez l’anneau de serrage du moteur. Ne tirez ou ne poussez 6) Enlevez le moteur SFX et substituez-le par la plaque d’étanchéité pas sur le réceptacle puisque cette force peut causer des pour rendre l’ensemble étanche.