Bosch+Sohn Boso User Instructions page 35

Recall of Last Temperature Measurement
in Body Temperature Mode
To recall the latest temperature measurement in body tempera-
ture mode, press the M button while the bosotherm diagnostic
is in body temperature mode. The last body temperature mea-
surement is displayed together with the blinking M symbol for
about 5 seconds.
Temperature Measurements of Objects
1. Press the START button and hold it while activating the boso-
therm diagnostic with the
device performs a self-test and will be in object mode after
a few seconds. When the bosotherm diagnostic is ready for
a temperature measurement of an object, the "- - -" symbol
blinks in the display and the symbol for object mode appears.
2. To correctly measure the tempera-
ture of an object, hold the device at
a distance of about 5 cm (or less)
in front of the surface so that the
sensor points toward the object.
3. Once the bosotherm diagnostic is in the correct position,
press the START button to perform a measurement of the
object's temperature. The measurement process takes about
one second. The display indicates that the measurement is
running.
Ý Push
M button
Ý Push
START button
and hold
down, then
press
Ý
button. After activating, the
button
Ý
Ý
Ý
35