Boss Cube Street II Owner's Manual page 9

Controlling the CUBE STREET II from a
Mobile Device App
Use the "CUBE STREET II Editor" app to edit effects and save settings on
this unit.
For details on the CUBE STREET II Editor, see the BOSS website.
https://www.boss.info/
Connecting to the App
Here are the settings to make in order to use an app on your mobile
device.
* Make the connection from the app's settings, not from your mobile
device's Bluetooth settings.
1.
Turn on the power of the CUBE STREET II.
2.
Place the mobile device that you want to connect close to
the CUBE STREET II.
3.
Turn on the Bluetooth function
of the mobile device.
* When connected to Bluetooth audio, the Bluetooth indicator on the
BT-DUAL lights up. Note that the unit has not finished connecting
with the app at this time.
MEMO
This explanation uses the iPhone as an example. For details, refer to
the owner's manual of your mobile device.
Troubleshooting (Troubles with Bluetooth Functionality)
Problem
"CUBE-ST2" does not show up in the
Bluetooth device list on my mobile device
Can't connect to Bluetooth audio
Can't connect to an app
In your mobile device's Bluetooth setting
screen, you tap "CUBE-ST2 MIDI" but can't
connect to the app
You pressed the BT-DUAL's pairing button,
but can't connect to the app
Can't connect to a paired mobile device
MEMO
If you've checked these points and the problem still occurs, please refer to the BOSS support website.
https://www.boss.info/support/
What to check and do
The Bluetooth function might be
turned off (disabled).
If your mobile device's Bluetooth
device list shows "CUBE-ST2"
If your mobile device's Bluetooth
device list does not show "CUBE-ST2"
Remove the "CUBE-ST2 MIDI" device first that was registered on your mobile device, turn the mobile device's Bluetooth
function off and then back on, and then connect using the settings in the app (CUBE STREET II Editor).
Make the connection from the settings of the app (CUBE STREET II Editor), not from your mobile device's Bluetooth
settings.
You cannot connect simply by press the pairing button on the BT-DUAL.
In the Bluetooth settings of your mobile device, turn the Bluetooth function on, and then connect from the settings of
the app (CUBE STREET II Editor).
If the connection breaks immediately after it is established, turning the mobile device's Bluetooth switch off and then
on again may fix the connection.
Wireless Connection with a Mobile Device
4.
In the app's settings, connect to CUBE-ST2 MIDI.
NOTE
Do not tap "CUBE-ST2 MIDI" shown in the Bluetooth settings of the
mobile device.
Disabling Bluetooth Functionality
If you want to disconnect the Bluetooth connection between the BT-DUAL
and your mobile device, disable Bluetooth functionality.
When this unit is not connected to the mobile device via Bluetooth, we
recommend you turn off Bluetooth to save on battery power.
1.
Press the pairing button on the BT-DUAL.
The Bluetooth indicator goes dark.
The Bluetooth function is enabled when you press the BT-DUAL's pairing
button.
Bluetooth Audio:
A device named "CUBE-ST2 Audio" appears.
Connected to an app:
A device named "CUBE-ST2 MIDI" appears.
Check these settings from within the app, such as the CUBE STREET II Editor.
Deregister the device in the mobile device's Bluetooth settings. Turn the
Bluetooth function off and then on again, and try pairing again.
Turn the mobile device's Bluetooth function off and then on again, and initiate
pairing from the CUBE STREET II to re-establish pairing.
Page
p. 8
p. 8
p. 9
9