Download Print this page

THE RADIATOR COMPANY Extro Fitting Instructions

Advertisement

Quick Links

Technical Specifications
Materials
Aluminium
Connections
1
"
flow and return.
2
Test pressure
24 Bar
Testing authority
EN442
Maximum operating pressure
16 Bar
Maximum working temperature
90 ºC
Packaging
Polystyrene protection in cardboard box
PLEASE NOTE: To reduce the possibility of noise caused by rapid heating and cooling
of aluminium radiators; adequate capacity for expansion must be provided within
the overall heating system. Systems using micro bore pipework must have adequate
pressure and flow rates for the number and style of radiators on the system.
Terms & Conditions
All products must be inspected once removed from the packaging and The Radiator Company
notified within 28 days of delivery of any scratches, blemishes or other damage.
The Radiator Company will then replace the radiator.
Imperfect radiators should therefore not be fitted and The Radiator Company will not accept
responsibility for replacement of scratched or damaged radiators once they have been fitted. This
includes any consequential loss or cost of fitting.
If The Radiator Company are not notified within 28 days of the date on the signed delivery note then
it will be deemed that The Radiator Company have fully complied with its obligations and claims will
not be considered.
Failure to comply with any of the above may invalidate any claims.
We recommend that after you check the product on delivery that it is stored in its packaging to
prevent damage prior to installation. The Radiator Company cannot accept responsibility for items
damaged after delivery.
Guarantees & Liabilities
As we are not the manufacturers of this product we will take all reasonable endeavours to make
over to you the benefit of any warranty or guarantee given by the manufacturer, which is usually five
years on most of our range. (Copies of specific guarantees for any of our products are available on
request).
The guarantees in all cases are subject to the products being installed in accordance with British and
or European standards as well as these fitting instructions. The guarantees in all cases are restricted
to the free of charge replacement or repair of the failed product only. Our liability will under no
circumstances extend beyond the repair or replacement of the product supplied by us. Claims
for either labour in replacement or damage to property are not admissible. Any goods that are
returned, in the event of a problem, will belong to The Radiator Company.
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
THE
RADIATOR
COMPANY
Fittings Instructions
Please read these instructions and terms and
conditions carefully prior to installation.
Failure to do so may invalidate the warranty
The Radiator Company
Units 13 - 14 Charlwoods Road
East Grinstead
West Sussex
RH19 2HU
EXT1.2
If you have any questions please contact us on 01342 302250
www.theradiatorcompany.co.uk
Ex t ro
5

Advertisement

loading
Need help?

Need help?

Do you have a question about the Extro and is the answer not in the manual?

Questions and answers

Summary of Contents for THE RADIATOR COMPANY Extro

  • Page 1 If The Radiator Company are not notified within 28 days of the date on the signed delivery note then it will be deemed that The Radiator Company have fully complied with its obligations and claims will not be considered.
  • Page 2 (already fixed) into the bracket sleeves. To secure, insert the provided Grub Screws The Radiator Company prides itself on selecting products from ‘D’ into the side of the bracket sleeves, and tighten using an Allen manufacturers who exercise tight quality control measures.