Table of Contents
Advertisement
Quick Links
PRIOR TO INSTALL
Ensure install location has a minimum of 2 to 3 hours of
direct midday sun exposure for best performance. Install
footing and pole as per specifications. Please handle fixture
with care as scratches will affect appearance and powder
coat durability.
TOOLS REQUIRED
•
1/8 inch hex key
•
5/32 inch hex key with torque wrench
TO INSTALL
1.
UNPACK MOUNTING ARM.
mounting arm from box and remove
packing material.
3.
DRILL HOLES IN POLE.
drilled, drill holes in pole as shown. Note:
The .50 inch hole is for a ground wire and is
optional.
First Light Technologies
Document 70-0017 11 March 2019
©Copyright First Light Technologies
INSTALL INSTRUCTIONS
SCL SERIES - SOLAR LED AREA LIGHT
Remove
Mounting
Arm
If pole is not pre-
Pole
2.
REMOVE MOUNTING BOLTS FROM
MOUNTING ARM. Remove mounting
bolts using
5/32" hex key.
Mounting
Arm
Mounting
Bolts
4.
ATTACH MOUNT TO POLE.
plate into pole and thread bolts fully into
backing plate through the mounting arm.
Ensure flat side is placed against the inner
surface of the pole. Torque bolts to 70 in-
lbs.
Mounting
Bolts
Mounting
Arm
Backing
Plate
Insert backing
Backing
Plate
Pole
www.firstlighttechnologies.com
info@firstlighttechnologies.com
Toll Free 1.844.279.8754
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for First Light SCL Series
Summary of Contents for First Light SCL Series
- Page 1 INSTALL INSTRUCTIONS SCL SERIES - SOLAR LED AREA LIGHT PRIOR TO INSTALL Ensure install location has a minimum of 2 to 3 hours of direct midday sun exposure for best performance. Install footing and pole as per specifications. Please handle fixture with care as scratches will affect appearance and powder coat durability.
- Page 2 INSTALL INSTRUCTIONS SCL SERIES - SOLAR LED AREA LIGHT INSTALL LIGHT ON MOUNTING ARM. OPEN LID. Loosen lid fastener with Remove light from box and install on the 1/8” hex key and open lid. mounting arm. Tighten chassis bolts with 5/32”...
Need help?
Do you have a question about the SCL Series and is the answer not in the manual?
Questions and answers