Subscribe to Our Youtube Channel
Related Manuals for AutomationDirect IronHorse GSDA-AI-A8
Summary of Contents for AutomationDirect IronHorse GSDA-AI-A8
- Page 1 ™ GSDA-AI-A8 Analog Module User Manual User Manual Number: GSDA-AI-A8 IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 1...
-
Page 2: Warning
770-844-4200. This publication is based on information that was available at the time it was printed. At AutomationDirect we constantly strive to improve our products and services, so we reserve the right to make changes to the products and/or publications at any time without notice and without any obligation. -
Page 3: Table Of Contents
GSDA-AI-A8 User Manual Overview � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 IronHorse GSDA-AI-A8 General Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 GSDA-AI-A8 Overview �... -
Page 4: Gsda-Ai-A8 User Manual Overview
All information contained in this manual is intended to be correct. However, information and data in this manual are subject to change without notice. AutomationDirect (ADC) makes no warranty of any kind with regard to this information or data. Further, ADC is not responsible for any omissions or errors or consequential damage caused by the user of the product. -
Page 5: Gsda-Ai-A8 Overview
• Programmable, form C Relay output, (Alarm 2) Warranty AutomationDirect, Inc. (ADC) warrants its products to be free from defects in material and workmanship. The exclusive remedy for this warranty is ADC factory replacement of any part or parts of such product which shall within 12 months after delivery to the purchaser be returned to ADC factory with all transportation charges prepaid and which ADC determines to its satisfaction to be defective. - Page 6 Down button is pushed, the factory settings will NOT be installed and the card will NOT be initialized. The option to install the card will appear every time power is applied to the GSD8 drive until the card is configured or removed. IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 6...
- Page 7 (White) IF NEEDED 9-36 VDC EXCITATION SUPPLY GSDA-AI-A8 RELAY Output - Normally Closed Form C Relay Output GSDA-AI-A8 RELAY Output - Normally Open (Programmable) GSDA-AI-A8 RELAY Output - Common IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 7...
-
Page 8: How To Change A Parameter's Value
5) Press the Enter button to save the changes (Returns to Parameter Mode) 6) Select Parameter Zero (“0”) and press the Enter button to return to Running Mode NOTE: See control manual for further explanation IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 8... -
Page 9: Gsda-Ai-A8 Software Parameters
GSDA-AI-A8 must be replaced in a GSD8 Drive, the “new” GSDA-AI-A8 does not need to be configured� It will simply “inherit” the “old” GSDA-AI-A8’s parameter settings, provided it is placed in the same slot� IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 9... - Page 10 20mA endpoint of the GSDA-AI-A8’s Output range� To return to the factory-calibrated 20mA endpoint, set this parameter to a value of zero� IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 10...
- Page 11 This shows the instantaneous state of the Auto/Manual switch input� A value GSDA-AI-A8 Auto/Manual Switch of zero means that the GSDA-AI-A8 will report “Manual” mode to the GSD8 State Drive� A value of 1 equals “Auto” mode� IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 11...
- Page 12 Literature Number: LT182 Drawing Number: A-5-4165A IronHorse GSDA-AI-A8 User Manual – 1st Edition – 06/13/2019 Page 12...
Need help?
Do you have a question about the IronHorse GSDA-AI-A8 and is the answer not in the manual?
Questions and answers