Rear-Facing Imager Foam Assembly - Lenovo Moto Z4 Service And Repair Manual

Lenovo Moto Z4
Level 2 – Service and Repair Manual

Rear-Facing Imager Foam Assembly

Description
Stingray RearCVR FLSHGRY Etching NA
Stingray RearCVR FLSHGRY Etching VZW
Stingray RearCVR WHT Etching VZW
Stingray FRU RearCVR FLSHGRY
Stingray FRU RearCVR WHITE
DIECUT_FOLES_MAIN_CAM_GASKET
1. Use the Tweezers to remove the Rear-
Facing Imager Foam from the carrier.
2. Use the Tweezers to place the Rear-
Facing Imager Foam in the pocket of the
Front Housing, on top of the Flash PCB.
PAGE 111
Reference #
5
--
Lenovo Confidential Restricted:
Do not share without consent from Lenovo