THOMSON THFP248GM Instruction Manual page 35

3. Hold the blender handle into the output
connector, rotate it clockwise to lock.
Usage of the blender
1. Put the sliced fruit in the glass bowl, add water, milk or other liquids and
close the lid.
2. Lock the bowl by turning it clockwise.
3. After installation, turn on the power and adjust the speed until the
desired effect is achieved.
4. If the fruit cubes are large, use the PULSE level for 2 or 3 seconds and
then return to the appropriate speed.
Cautions:
1. Make sure the machine is off before install the blender.
2. Pause level cannot be stay for a long time, but can be repeat operated.
3. Do not turn on the machine for more than 30s while the blender is empty.
4. Do not put food into the blender exceed the capacity.
5. The blender is glass, water over 40℃ is not allowed.
EN-14