Table of Contents
Advertisement
Operating Instructions
A.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
. . manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release the Trigger and unplug the tool from its electrical outlet before adjusting the tool or
installing accessories.
Adjusting the Auxiliary Handle
Hammer Drill
Chisel
Mode
Mode
Auxiliary Handle
Figure C: Mode Selector
Figure B: Auxiliary Handle
Band
Adjust the Mode Selector to the desired function before
using the Rotary Hammer. Press the Release Button
and rotate the Mode Selector until it clicks in place
with the Indicator pointing to the desired function.
NOTICE: Move the Mode Selector only when the
Motor is stopped. Attempting to move the Mode
Selector while the Motor is engaged will result in
abrupt bit rotation and can cause property damage.
NOTICE: When moving the Mode Selector,
make sure it clicks into the desired position. If
not locked in place, the Mode Selector could
slip out of position resulting in tool damage.
To Hammer Drill: Rotate the Mode Selector
to the Hammer Drill Mode setting. The
tool will hammer drill when powered.
To Chisel: Rotate the Mode Selector to the Chisel
Mode setting. The tool will chisel when powered.
Adjusting the Functions
The Auxiliary Handle can be placed in a
variety of positions to obtain an efficient
working angle and to act as a depth stop.
To adjust the Auxiliary Handle, turn the Handle
counterclockwise to loosen the Band. Slide
the Handle to the desired position then turn the
Handle clockwise to secure the Band in place.
Adjusting Speed
Near the Power Cord is the Speed Control adjustment
dial. Turn the dial to the desired speed level.
The higher the number the faster the speed.
Speed
Adjust
Figure D: Speed Control
Item 64425
For technical questions, please call 1·888·866·5797.
Page 9
Hide quick links:
Advertisement
Table of Contents
