Instruction Manual HBMD-PH and HBMD-L Introduction and Design HBMD-PH and HBMD-L are similar products with The M12 plug at the end of the black box is the different software settings. sensor input and the plug on the blue surface is the plug connected to the PLC.
If changes are made to type-approved equipment, this type approval becomes void. The equipment’s inputs and outputs as well as its accessories may only be connected as shown in this guide. HB Products assumes no responsibility for damages that result from failing to abide by the above.
When used as pH sensor there is an opportunity to calibrate the sensor using the HB-tool. How to calibrate the pH-sensor and typing it into the display box HBMD-PH 1. Connect the pH sensor to the display box according to the electrical connection drawing instead of a multi meter 2.
Further Information For further information please visit our website www.hbproducts.dk or send an email to support@hbproducts.dk HB Products A/S – Bøgekildevej 21 – DK8361 Hasselager – support@hbproducts.dk – www.hbproducts.dk HBMD-manual –-EN-01 6 / 6...