Safety Precautions - Bolttech-Mannings TorqLinks Operation & Maintenance Manual

Revision No.: 20
Your Bolttech-Mannings torque wrench is a power tool, and as with any power
tool, certain safety precautions should be observed to avoid accidents or
personal injury. The following tips will assist you:
 Do not kink the hydraulic hoses, and be sure they're clear of any possible
reaction surface during operation.
 Do not use the hoses or any hydraulic connection as a "handle"
 All Torq links have an integrated reaction bar. The reaction bar should be
located on a solid, secure reaction point. For added safety, remain clear of
the reaction bar during operation. Also, when initially applying the tool,
pressurize the system momentarily; if the tool tends to "ride up" or "creep",
stop and re-adjust the reaction bar to a more solid and secure position.
 In most cases, the tool will allow "hands-free" operation. If the tool must be
held or steadied during operation, avoid handling the area around the
reaction bar.
 Electric pumps should never be used in any atmosphere which could be
considered potentially volatile. If there is any doubt, use an air pump.
WHEN OPERATING OR ASSEMBLING EQUIPMENT, BE SURE TO ALWAYS
WEAR THE NECESSARY SAFETY PERSONAL PROTECTIVE EQUIPMENT
AS FOLLOWS:
 Safety glasses
 Protective leather gloves
 Hard toe safety shoes
 Protective FR garments or torso protective clothing
 Hearing protection – ear plugs
 Head protection – as required per the safety hazards present
At Bolttech-Mannings, safety is one of our primary concerns. By following these
few, simple precautions, you'll be sure to obtain the most beneficial use of your
Bolttech-Mannings wrench system in the safest manner possible.

SAFETY PRECAUTIONS

Revision Date 8/14/2014
Page 4 of 49