Sound Settings; Network Services - Bang & Olufsen Serene User Manual

48
>> Settings
Backlight
(Menu 9.3.3)
Use this menu to select the length
of time the backlight of the display
stays on.
Dim
(Menu 9.3.4)
Use this menu to select the length
of time the display is in Dimming
mode after the backlight turns off.
After a specified time has elapsed,
the display turns off.

Sound settings

(Menu 9.4)
Use this menu to customise sound
settings to suit your preferences.
• Ringtone: select a ringtone for
the call ringer.
• Ring volume: select a ringtone
volume.
• Ringtone type: specify how
you are to be informed of
incoming calls.
Mute: the phone mutes the call
ringer.
Melody: the phone rings using
the selected ringtone.
Vibration: the phone vibrates
but does not ring.
Vibration and melody: the
phone vibrates and rings at the
same time.
• Message tone: select a
ringtone for incoming
messages.
• Message alert type: specify
how you are to be informed of
incoming messages.
• Alerts on call: set the phone to
beep when you receive a new
message, or when an alarm is
triggered during a call.
• Quiet mode: specify how the
phone alerts you to a specific
event in Quiet mode.

Network services

(Menu 9.5)
Use this menu to access network
services. Please contact your service
provider to check their availability.
Call diverting
(Menu 9.5.1)
This network service reroutes
incoming calls to a phone number
that you specify.
1. Select a call diverting option:
• Divert always: divert all
calls.
• Busy: divert calls when you
are busy with another call.
• No reply: divert calls when
you do not answer the
phone.
• Unreachable: divert calls
when you are not in an area
covered by your service
provider or when your phone
is switched off.
• Cancel all: cancel all call
diverting options.
2. Select the type of calls to be
diverted.
3. Select Activate. To deactivate
call diverting, select Deactivate.
4. Move to the Divert to line.