Bang & Olufsen DVD 1 User Manual page 6

6
DVD 1 will prompt you to choose
settings for menu language, subtitle
language, audio language, picture
format and country when you first
switch it on.
These settings can be changed at any
later time. Please see Change picture,
sound or language settings on page
14 for information about how to
choose setting options.
Subtitle and audio language settings
are preferred language settings
which will not be played by DVD 1 if
these languages are not provided on
the DVD being played.
*NOTE! If your Beo4 remote control does not
have a DVD button, press LIST until CDV is shown
in the Beo4 display and press GO. Refer to the
Guide included with your Beo4 for information
about how to add CDV to the Beo4 list. If you
have a Beo1 remote control, please refer to
page 22 for information about how to use DVD 1
functions.
First-time setup of DVD 1
First-time setup of DVD 1 begins the moment
you connect DVD 1 to the mains and switch it
on. An on-screen menu guides you through
the process.
Auto Configuring in Progress
Menu language
English
Español
Français
Portuguès
Italiano
To set up DVD 1 before first-time use...
> Connect your DVD 1 to your television and to
the mains as shown on the preceding page.
> Turn on your television and press DVD on your
Beo4 remote control*. 'Auto Configuring In
Progress' appears briefly on the screen.
> The VIRGIN MODE menus appear on the screen
and prompt you to choose from the options
displayed. These include menu language,
subtitle language, audio language, picture
format and country.
> Press or
▲
each of the menus.
Virgin Mode
> Press GO to enter each of your choices.
on your Beo4 to navigate through
▼