Table of Contents
Advertisement
Turning ON Your RSM
Press and hold the RSM PTT button to turn it ON.
• The RSM LED lights GREEN for one sec-
ond, indicating successful power-up.
• An audio alert tone sounds.
Establishing the Bluetooth Wireless Connection
Following these simple steps establishes a new
connection when your RSM and radio are first
tuned on:
1. Turn ON your Bluetooth capable radio. (Refer
to your radio or Radio Bluetooth Adapter
(RBA) manual).
2. Turn ON the RSM.
3. Place the RSM next to the radio. (For best
results keep both within a few inches of each
other.)
• The RSM LED lights GREEN for one sec-
ond then flashes ORANGE until a connec-
tion is established. If a connection has not
been established, the LED flashes RED.
• Once the RSM and radio have connected,
the RSM LED lights GREEN for one sec-
ond then flashes GREEN every 5 seconds.
• Once a connection is established, an audio
alert tone sounds.
10
Advertisement
Table of Contents
