Attaching And Removing The Belt Clip; Wearing Your Rsm - Motorola HMN3158 Manual

Attaching and Removing the Belt Clip

To Attach
1. Locate the grooved rails on
the back of the RSM.
2. Align the mounting rails of
the belt clip with the
grooved rails on the back
of the RSM. Slide the belt
clip up the grooved rails
until it clicks into place.
To Remove
1. Locate the belt clip
release tab at the bot-
tom of the belt clip.
2. Insert a small screw-
driver between the release tab and the back
surface of the RSM.
3. Slide the belt clip down and off the RSM.

Wearing Your RSM

For optimum performance from your RSM, use it
within 30 feet of your radio or attach it using the
belt clip (See Figure 2). Wearing your RSM on
different locations of your body may result in vary-
ing reception. Adjust the RSM accordingly to
attain maximum reception quality.
9