Table of Contents
Advertisement
WALCOM
WALMEC ITALY
HEADQUARTERS
WALMEC S.p.A.
Via Trieste, 10
31025 S.LUCIA DI PIAVE (TV) ITALY
Tel. +39 0438 6611
Fax +39 0438 661333
e-mail:
walmec@walmec.com
Web: www.walmec.com
AI51/10EN
®
SPRAY GUN WASHERS
EASY - Ref. 90060
EASY/S - Ref. 90061
Operating and maintenance handbook
WALMEC ITALY
PRODUCTION PLANT
WALMEC S.p.A.
Viale della Vittoria
24054 CALCIO (BG) ITALY
Advertisement
Table of Contents
Summary of Contents for WALMEC Walcom Easy
- Page 1 ® WALCOM SPRAY GUN WASHERS EASY - Ref. 90060 EASY/S - Ref. 90061 Operating and maintenance handbook WALMEC ITALY WALMEC ITALY HEADQUARTERS PRODUCTION PLANT WALMEC S.p.A. WALMEC S.p.A. Via Trieste, 10 Viale della Vittoria 31025 S.LUCIA DI PIAVE (TV) ITALY 24054 CALCIO (BG) ITALY Tel.
-
Page 2: Table Of Contents
CONTENTS Introduction …………………………………………………………………………………………………. 3 Description of the spray gun washer …………………………………………………………………………3 Opening the packing case …………………………………………………………………………………… 4 Installing the spray gun washer ……………………………………………………………………………… 5 Technical data ……………………………………………………………………………………………….. 6 Safety precaution ……………………………………………………………………………………………. 6 Maintenance ………………………………………………………………………………………………… 7 Warranty certificate ………………………………………………………………………………………… 8 Declaration CE of conformity ……………………………………………………………………………… 9... -
Page 3: Introduction
INTRODUCTION EASY spray gun washers are used to wash spray guns and accessories manually. They are compressed air devices which are easy to use and highly practical; they work at high or low pressure and consume less than a conventional airbrush. DESCRIPTION OF THE SPRAY GUN WASHER It has two parts (see fig. -
Page 4: Opening The Packing Case
fig. 1 OPENING THE PACKING CASE The cardboard packing case includes inner wrapping with corrugated cardboard. The packing case should only be moved by fork-lift truck and handled at all times by two people, until installation is complete. Carry out the following instructions: 1. - Page 5 fig. 2 fig. 3 fig. 4 fig. 5...
- Page 6 fig. 7 fig. 6 fig. 8 fig. 9...
-
Page 7: Installing The Spray Gun Washer
INSTALLING THE SPRAY GUN WASHER a) Place the base vertically; the two brackets for the solvent bins should be at the bottom. b) For the EASY/S model, assemble the knob at the centre of the hatch and tighten the screw provided. The hatch has a pin at the bottom left: place this pin in the hole on the left of the base. -
Page 8: Technical Data
TECHNICAL DATA Overall weight 35 kg Overall height (base + washing chamber) 1400 mm Width 620 mm Depth 400 mm Suction nozzle diameter 1.3 mm Chimney hose diameter 100 mm Air consumption of the suction nozzle at 8 bar 90 l/min Air consumption for continuous jet at 8 bar 70 l/min Air consumption for atomized jet at 8 bar... -
Page 9: Maintenance
MAINTENANCE For routine maintenance operations remove the panel separating the washing chamber from the nozzle section, then carry out the following instructions weekly: Clean the tank • Clean the level with nozzles and tanks; remove the partition as follows: turn the handle and push towards the •... -
Page 10: Warranty Certificate
Parliament and the Council of May 25, 1999. In the event of manufacturing defects the spray gun washer must be returned through the original WALMEC SPA dealer, together this Warranty Certificate indicating where the problem lies and with all sections properly filled in. -
Page 11: Declaration Ce Of Conformity
Models: EASY; EASY/S Assistance: WALMEC S.p.A. - Via Trieste, 10 - 31025 S. LUCIA DI PIAVE (Treviso) - Italy WALMEC S.p.A. - Via Trieste 10, 31025 S. LUCIA DI PIAVE (TV) – Italy, manufacturer of...