Panasonic 140 Installation And Maintenance Manual page 24

Supplying the unit with a line imbalance exceeding the acceptable value will result in the warranty being
CAUTION
void.
Correction of the excessive centralized power factor (>0,95) may generate transient phenomena dangerous
CAUTION for the motors and contactors of the unit during the start and stop phases. Check instant voltages during
these phases.
These units are equipped with a switch used to locally
isolate the terminal board.
The supply cables of the units must be routed up to the
section switch through the grommets present on the front
panel of the units.
To ensure proper contact, fi t cable terminations suited to
the cross-section of the connecting cable.
Copper cable only
24