Advertisement
3.3.
INSTALL CASTORS (Fig.2).
3.3.1. Carefully lay the cabinet on its top using the packaging material to protect the paint finish.
3.3.2.
Position the two swivel castors on the rear side of the cabinet, insert the bolts through the castor into the cabinet and tighten securely.
3.3.3. Position the two fixed castors at the front of the cabinet, ensure that the brake levers are positioned correctly (see fig.2), fit the front two bolts
first, and then the remaining bolts and tighten securely.
4. OPERATION
4.1.
DRAWER REMOVAL
4.1.1.
Empty the drawer.
4.1.2.
Pull open the drawer to almost its full extension.
4.1.3.
Push up on the right hand black lever and down on the left hand black lever as shown in Fig.3 and then pull the drawer outward until it is
released from its runners.
4.1.4. To refit align the drawer onto its runners and gently close the drawer and the drawer locks will click into place.
NOTE: Ensure that both locks have located properly before using the drawer.
5. MAINTENANCE
Lubricate the drawer runners twice yearly.
Lubricate the castors annually with a high quality bearing grease.
Periodically clean the unit with a mild solution of detergent and water.
To obtain a parts list and diagram please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
Parts support is available for this product.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.2
fig.3
01284 757500
www.sealey.co.uk
We b
01284 703534
sales@sealey.co.uk
email
AP04DFC Issue No:2(I)-29/07/13
Advertisement
