GE AG16AB2TAA Installation And User Manual page 8

F
MODE BUTTON
Mode button
Once your device is switched on you may select between
AUTO and CONTINUOUS mode. There is a 2 second
delay when selecting between the two modes.
With AUTO mode the dehumidifier will be operating for
as long as required in order to achieve the relative
humidity level you have sent on the unit.
With CONTINUOUS mode the dehumidifier will work
continuously at higher speed HI-EFFICIENT (by default)
until you turn it off. However, in CONTINUOUS mode
you can also select low speed SILENCE if you need quite
(low noise) operation.
For energy saving purposes, we recommend that you
operate your unit at AUTO mode. In the case you need
fast and high efficient operation as in the case of clothes
drying or for dehumidifying of areas with high concentra-
tion of humidity, we recommend that you run your unit at
CONTINUOUS mode on HI-EFFICIENT speed for more
immediate results.
G
POWER BUTTON
Once you connect your device to the mains a sound will
be heard and your device will be in stand-by mode. When
your device is in stand-by mode, only the operation
indicator light will be illuminated (the one above POWER
key). Press the "POWER" key to turn on and off the unit.
During activation, the characteristic sound will be heard
and the unit will start its operation and the AUTO mode
and SILENCE speed indicator lights will illuminated.
During first operation, the unit will be working according
the pre-programming: 50% relative humidity level,
SILENCE speed and AUTO mode. After switching on your
device, you may select the speed level, relative humidity
level and operation mode you desire between AUTO or
CONTINUOUS. Your device will memorize the latest
settings you have set and the next time you switch it on,
it will start operating according to your latest settings.
6