Opel 1973 Service Manual page 10

1973 OPEL SERVICE MANUAL
Fig. 6A.12 Transmission Cross Member
Installation (Opel 1900 and Manta)
1. Lower engine and transmissior assembly into car.
2. Install components as remov&d in steps .1 through
19 above.
Figure 6A-14 Engine Support Tool - Opel 1900 and Manta.
Installation (GT)
1. Install bell housing, transmission and starter.
c l e .
3. Install components as removed in steps 1 thru 21.
ENGINE OIL PAN REMOVAL AND INSTALLATION
Removal (Opel 1900 and Manta)
To remove the engine oil pan, a device similar to the
one illustrated in Figure 6A-14 can be made and used
to support the front of the engine. This particular
device was made up using hardwood, bolts, and
chain.
1. Assemble chains to engine.