Travel Cup Operation; Chopping Cup Operation; Operating And Safety Tips - Cuisinart CPB-300XA Instruction And Recipe Booklet

TRAVEL CUP OPERATION

1. Put food ingredients into the travel cup, and then attach blade assembly.
Note: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, place the assembled
travel cup onto the base and secure into place. The unit automatically is activated
and in Standby mode with the red POWER LED illuminated and flashing.
3. For continuous blending, press the desired speed. The blue LED light will illuminate,
indicating that the blender is on and running. It is possible to switch between High
and Low speeds by simply pushing the desired speed button.
4. To pause the blending process, press the activated speed button. The blending
process will stop. The red Standby indicator light will continue to flash to let you
know that the blender is still activated. To reengage the unit, choose the desired
speed.
5. When you have finished blending, press activated speed to put in Standby mode.
Remove the travel cup from the base. Unplug the unit.
6. Turn cup right side up, turn blade assembly counterclockwise to remove. Attach
travel cup lid by twisting clockwise.
7. Do not continue to operate over 1 minute.

CHOPPING CUP OPERATION

1. Put food ingredients into chopper cup filling it to a maximum of
one-quarter of its capacity, then attach blade assembly.
Note: Blade assemblies are interchangeable based on recipes and desired end
results.
2. With the base unit on the tabletop and the unit plugged in, place the assembled
chopper cup onto the base and secure into place. The unit automatically is activated
and in Standby mode with the red POWER LED illuminated and flashing.
3. To continuously chop, press High or Low speed.
4. To pulse, press Pulse and then desired High or Low speed.
5. When you have finished chopping, press activated speed to put in Standby mode.
Remove the chopping cup from the base. Carefully remove food with a spatula.
NEVER TOUCH THE BLADE ITSELF. Unplug the unit.
6. Do not continue to operate over 1 minute.

OPERATING AND SAFETY TIPS

bottom of the blender motor base.
blender jar cover on the blender jar while blending.
Don't place blade assembly onto motor base without the jar or cup attached.
Don't twist blade assembly from blender jar or cups when removing from
motor base. Simply lift jar or cups from motor base.
not use any utensil inside the blender while motor is on.
immediately, unplug the unit and let it cool for at least 15 minutes. Then, remove a
portion of the food and continue.
may result in injury.
5
®
. Doing so