Sharper Image 207015 User Manual page 3

MAINTENANCE
After using 5-6 times or 3-4 days, clean the product as follows:
1. Unplug the unit from its main power supply and remove the cover.
2. Pour out any remaining water from the tank.
3. Add a small amount of dish soap and water into the tank and wipe gently with a dry towel to
clean. Note: Avoid getting water into the air outlet.
4. Do not use other acids or aggressive detergents, as this may give off poisonous gas or
cause malfunction.
5. Change the water in the water tank every day and clean the diffuser regularly.
6. Pour the water out of the diffuser when it's not in use. Water accumulated over long periods
may create bacteria and mildew.
7. Never immerse the unit in water or let water enter the air outlet or any other entrance.
TROUBLESHOOTING
PROBLEM
The connector is not
plugged in or not
connected properly.
Diffuser won't
turn on
The main power supply is
not connected properly.
The product is damaged.
The water tank is
overfilled past the max
line.
More water needs to be
added into the water tank.
The mist is low, or no
The air inlet is blocked.
mist comes out at all
PCB damaged.
The outer cover or
water cover is blocked
by water film or other
foreign objects.
SPECIFICATIONS
PRODUCT NAME
INPUT VOLTAGE
OUTPUT VOLTAGE
CAPACITY
POWER
LED NIGHT LIGHT
HUMIDIFICATION
MATERIAL
HUMIDITY CONTROL
WORKS IN ROOMS FROM:
ULTRASONIC RATE
REASON SOLUTION
Check to see if the plug is
properly connected.
Check the main power
supply.
Contact customer service.
Check the water tank line
to see if the water has
been overfilled.
Add water.
Check the air outlet and
see if the fan is working
properly.
Contact customer service.
Clean the outer cover
and water cover with a
towel regularly.
HOLIDAY SNOWFLAKE 3D ROTATING
AROMATHERAPY DIFFUSER
AC 100-240V
DC24V
8.4OZ
10W
7 COLOR LIGHTS
25 ML/H
PP
MANUAL
215-269 SQ. FT.
1.7MHZ AROMA DIFFUSER
- 3 -