Advertisement
TECHNICAL DATA
Rated voltage
No-load speed
Collet diameter
Maximum thickness of plyboard/MDF
Weight - not including battery pack
Measured values determined according to EN 62841
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Vibration emission value
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1830R-X5
L1840R
L1850R
L1860R
L1860R-X5
L1890R
L1820S
Use AEG 18V battery and charger only
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
DRYWALL CUT-OUT TOOL SAFETY WARNINGS
Use clamps or another practical way to secure and support the workpiece
to a stable platform. Holding the workpiece by your hand or against the body
leaves it unstable and may lead to loss of control.
Use only rotary cutting bits of the correct shank diameter for the collet mounted.
12
DRYWALL CUT-OUT TOOL
Use only rotary cutting bits suitable for the speed of the product.
Ambient temperature range for tool during operation is between 0°C and 40°C.
Compatible charger
Ambient temperature range for tool storage is between 0°C and 40°C.
(not included)
The recommended ambient temperature range for the charging system during
charging is between 10°C and 38°C.
Additional safety warnings
AL18G
Remove the battery pack before starting any work on the product.
BL1218
Remove battery pack before storing or transporting the product.
BLK1218
BL18DP2-X5
Do not dispose of used battery packs in the household refuse or by
BL18DPS
burning them. AEG Distributors offer to retrieve old batteries to protect our
environment.
BL18S
Do not store the battery pack together with metal objects (short circuit
risk).
Use only AEG chargers for charging AEG battery packs. Do not use battery
packs from other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water. In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
Ambient temperature range for tool during operation is between 0°C and 40°C.
Ambient temperature range for tool storage is between 0°C and 40°C.
The recommended ambient temperature range for the charging system during
charging is between 10°C and 38°C.
12
BWT18
18 V
28000 min
-1
3.2 mm(1/8") or 6.35 mm(1/4")
32 mm (1.25")
0.87 kg
L
= 74.0 dB(A)
p
3.0 dB(A)
L
= 85.0 dB(A)
W
3..0 dB(A)
a
= 4.0 m/s
2
h
1.5 m/s
2
Advertisement
