To enter Service Mode, press all four temperature pads simultaneously for 3 seconds.
Note: The display must be lit before entering Service Mode – press any pad to light.
Zeros will flash on the display when service mode has been entered.
Press any pad other than the temperature pads to lock in the Service Mode.
Press any pad other than the temperature pads to lock in the Service Mode
A test mode must be selected within 30 seconds or diagnostics will time out.
Select a test & press COLDER/WARMER pads to the test #, then press another
pad to start that test.
The test mode will automatically time out after 15 minutes of inactivity.
g
GE imagination at work
Service Diagnostics
GE Profile 42-48 Refrigerators (4/1/05)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2007 General Electric Company – 12/14/2009
98